除氨氮专用强酸型阳离子交换树脂 ISO-9001/ISO-14001/OHSAS-18000

Tulsimer ^®T-42H 是均粒强酸型阳离子交换树脂，氢H+/钠Na+均粒阳离子交换树脂，适用于高浓度氨氮去除，也可适用于其他浓度氨氮去除系统。

Tulsimer ^® T-42H 强酸型阳离子交换树脂，是一款具有较高的交换容量，同时拥有的物理及化学稳定品质。可以应用于高浓度氨氮废水处理中，出水氨氮可达到0.1ppm以下。

Tulsimer ^® T-42H 其均匀的颗粒直径，具有传统的离子交换树脂无法取代的优势，可以减少压力损，延长树脂寿命，保证出水品质。

 联系方式18666729770 （微信同号） 王工

典型特性（TYPICAL CHARACTERISTICS）：Tulsimer ^® T-42 H 

主体结构/Matrix structure                                 Cross linked polystyrene

型式(Type)                                                         Strong acid Cation exchange resin

物理型式/Physical form                                      湿润球状/Moist spherical beads 

官能团/Functional group                                   磺酸基/Sulphonic

粒径Particle size (Mesh)                                    Particle less than 0.3mm max. 1%

均匀系数(Uniformity coefficient)                       Max. 1.25

平均粒径(Harmonic Mean size)                         580 + 50 um

全交换容量(Total Exchange Capacity)               1.80 meq/ ml

离子型式(Ionic form)                                         Hydrogen (H+)

膨胀系数(Swelling (approximately))                  7% from Na+ to H+ form. 

湿度/Moisture content                                      53%

密度(Backwash settled density)                         800-840 g/l in H+ form
允许温度(Maximum temp. stability)                  120°C in H+ form

PH范围/PH range                                               0 - 14

溶解率(Solubility)                                               Insoluble in all common solvents

操作条件（OPERATION CONDITIONS）：Tulsimer ^® T-42 H

操作温度(Operating temperature , max 0 C)               120
操作pH 范围(Operating pH range )                                    0 – 14
最小树脂床高度(Bed depth , mini mm)                               800
(Service flow rate ,Maxi )                                            120 m3/hr/ m3
逆洗水量(Backwash flow rate)                                            9 to 25 m3/hr/ m3
逆洗浮动空间(Back wash expansion)                                  40 to 75%
再生药剂(Regenerant )                                                       HCl, H2SO4 for H+ form,
再生药剂用量(Regeneration levels. )                                  30 to 120 gms HCl/ lit.
                                                                                           40 to 250 gms H2SO4/ lit.
再生药剂浓度(Regeneration concentration)                       3 - 5% HCl, 1.5 to 3% H2SO4
最少通再生药剂时间(Regeneration Contact time, mini)     20 min.
再生流量(Regeneration flow rate )                                     5 to 16 m3/hr/ m3
Regeneration slow rinse                                                    2 BV mini.
快洗用水(Fast Rinse )                                                          Service flow rate.
快洗水量(Fast Rinse Volume)                                              2 to 3 BV