产品介绍 / Product Introduction
聚醚砜滤芯,其过滤介质是当今世界上先进的聚醚砜微孔滤膜,聚醚砜膜膜孔占滤膜体积80%以上的微孔开孔率,具有独特的微孔几何形状,提高了对过滤难度较大溶液的过滤效率和流通量。采用聚醚砜和聚丙烯支撑两种材料组合热熔构成,无粘结物,适用于要求比较严格的化工和制药工业。
Polyether sulfone filter, the filter medium is the world's advanced polyether sulfone microporous membrane, the polyethersulfone membrane pore occupy the membrane volume more than 80% aperture ratio, has a unique pore geometry, improve the difficult solution filtration efficiency and liquidity. Adopt the Polyether sulfone and polypropylene support two materials assembly and hot melt.
主要特性 /Main features
独特的亲水性能,不含表面活性剂和表面润滑剂,为过滤溶液提供高水平的过滤精度和流通量,适用的PH范围广,对蛋白质及贵重生物制剂的吸附量低,截留率高、有极好的化学耐受性和热稳定性,强度好,耐正向和反向压力冲击。
The unique hydrophilic properties, free of surfactants and surface lubricant solution,provide a high level of filtering accuracy and liquidity for the liquid, suitable for a wide PH range, low protein adsorption capacity and precious biological agents, high retention rate, excellent chemical resistance and thermal stability, good strength, impact resistance both forward and reverse pressure.
应用领域 / Application Fields
制药工业:注射液、注射用水、滴眼液、不可高温灭菌产品、生物制品、疫苗、血清等终端除菌过滤。
食品工业:酒类、矿泉水、生活饮用水、饮料等过滤。
电工工业:高纯水、超纯水设备、化学原料等终端过滤。
Pharmaceutical industry: Injection, water for injection, eye drops, not high temperature sterilization products, biological products, vaccine, blood serum, terminal aseptic filtration.
Electrical industry: High pure water, ultrapure water equipment, chemical raw materials terminal filtration。
Food industry: Wine, mineral water, drinking water, beverage.ect.
四、 产品规格及技术参数 / Specifications & Technical Parameters
过滤精度(Filtration precision):0.1、0.2、0.45、0.65、1(μm)。
滤芯长度(Filter Length):5"、10"、20"、30"、40"。
密封材料:硅橡胶、丁腈橡胶、三元乙丙橡胶、氟橡胶。
Sealing material: Silicone rubber, NBR, EPDM, Viton.
密闭方式:热熔焊接。
Closed mode: Fusion welding.
有效过滤面积(Effective filtration area):≥0.6m/10" 。
滤芯直径(Filter diameter):69.0mm。
最高工作温度(Maximum operating temperature):85℃,0.05 Mpa。
最高耐受温度( Maximum tolerance temperature):140℃,0.28 Mpa。
最大正压差(The maximum positive pressure):0.42 Mpa(25℃)。
最大反压差(Maximum anti pressure):0.21 Mpa(25℃)。
灭菌条件(Sterilization condition):121℃ 30 min。
过滤介质:亲水性聚醚砜微孔滤膜。
Filter media: The hydrophilic polyether sulfone microporous membrane filter
上下流支撑材质:聚丙烯。
The up and downstream support material: Polypropylene
支撑架及结构元件:聚丙烯。
Support frame and structural components: Polypropylene